• 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C

229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C

No.1601225784316
The cabin main chassis wiring harness is designed for compatible CAT 312C 320C and 330C excavators. Reference numbers include 229-6850 271-3511 and 186-4605. It provides organized electrical connections between the cab chassis and related machine systems.
$500.00
Description

Product Overview

The cabin main chassis wiring loom is the electrical assembly that joins the operator cab to the machine side of a CAT 300-series excavator. Power and signal travel through it between the cab switches, the monitor, the control levers, the sensors and controllers, and the components mounted out on the chassis — including the injector circuits that leave the cab side and run back toward the Caterpillar excavator engine. While that path is sound the machine behaves predictably; when a conductor inside it breaks down, the faults it produces rarely look like wiring faults at first.

Replacing the loom as one assembly is usually the cheaper route. Chasing a single chafed wire or a corroded terminal through a packed cab loom can take a technician most of a shift, and the fault often returns weeks later at the next weak point. A matched wiring assembly puts a known set of conductors and connectors back into the machine in one operation, which is why workshops doing electrical restoration fit an assembly rather than repair the old one.

We supply this wiring assembly to repair workshops, fleet maintenance teams and excavator parts distributors working on 300-series CAT machines. Most orders come from a machine already in the workshop with a cab fault, though fleets running several units of the same family sometimes keep one as a standby to cut waiting time on the next breakdown.

Alongside it we hold a broad spread of CAT excavator parts — cab panels and monitors, sensors, relays, ECUs, engine parts, injector looms and engine looms — so one electrical repair does not have to be split across several suppliers.

Key Features

  • One assembly from cab to chassis. The wiring assembly covers the cab control circuits and the machine-side connections they feed, so a repair replaces the whole electrical run instead of splicing a section into an ageing loom.
  • Protected conductor runs. Insulation and outer sleeving carry each wire through the places an excavator does its damage: cab entry points, panel edges, and the length that runs exposed along the chassis.
  • Connector ends built for the machine. The terminations are made to seat in the connector bodies already on the machine, which keeps the job to unplugging the old assembly and clipping the new one into place for the technician performing the swap.
  • Branch points in the original positions. The loom splits where the factory loom splits, so it follows the existing clips, grommets and mounting points rather than being pulled into a different route.
  • Injector and sensor circuits in the same run. Because the injector wiring travels inside this assembly, maintenance teams do not have to chase a cab-side fault through separate CAT engine parts ordered one at a time.
  • Service points that are accessible. Connectors sit at the ends of the branches, so a suspect plug can be inspected or re-seated without unwrapping the whole loom.
229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C
229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C

Specifications

DetailSpecification
ConditionNew
Product name312C 320C 330C wiring harness
Part nameWiring assembly
ApplicationCrawler excavator
Brand Namelanxin
Place of OriginChina
Warranty1 Year
Video outgoing-inspectionProvided
Machinery Test ReportProvided
Marketing TypeOrdinary Product
Showroom LocationNone
Applicable IndustriesBuilding Material Shops, Machinery Repair Shops, Manufacturing Plant, Retail, Construction works , Energy & Mining, Other
229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C

Reference Numbers & Fitment Check

Three reference numbers are attached to this wiring loom: 229-6850, 271-3511 and 186-4605. They do not describe one loom that fits everything. They are the numbers used across different builds of the 312C, 320C and 330C, and the configuration behind each one can differ in connector arrangement, circuit branches and the points where the loom is anchored to the machine.

Fitment is settled by the loom configuration, not by the model badge. Two machines of the same model that left the factory years apart can carry different cab looms, and the engine underneath does not decide it either — two machines with the same CAT engine parts can still be wired to different specifications.

Before ordering, put the original and this loom side by side and compare six things: the part number on the original, the connector type and pin count at every end, the wire routing, the terminal configuration, the branch layout, and the mounting points. Where a bench comparison is not possible, clear photographs of the old loom laid out flat with the connector faces visible do the same job.

If the numbers do not match what is on your machine, stop there and check with us before you order. A loom that is close but not correct will plug in and still leave you chasing faults, which is a worse outcome than waiting a day for the right reference.

Machine Coverage & Work Scenarios

  • 312C machines already through the switch and the controller. When the switches, the controller and the earth points have been checked without a cure, the loom is the next stop; once the fault is traced to it, the wiring assembly goes in as a complete unit.
  • 320C units in fleet service. Fleets running several 320C machines on one site often keep a cab wiring assembly in stock so a cab fault does not wait on a parts order. Machines that share a CAT excavator engine do not necessarily share a cab loom, so the reference number decides, not the model plate.
  • 330C machines on construction and mining work. Longer shifts and heavier vibration wear the loom faster, especially where it passes through the cab floor and along the chassis. Downtime on a machine this size is expensive, which is why this wiring assembly is one of the CAT excavator parts fleets tend to hold on the shelf.
  • Repair workshops doing electrical restoration. When the diagnosis is already done, the workshop wants the assembly on the bench — not a list of terminals to crimp one by one while the machine occupies a bay.
  • Parts counters and resellers. A shop supplying a local machine population stocks the reference numbers those machines actually use. This wiring assembly sells against a known model range rather than a generic fitment, which makes it easier to hold alongside the rest of your excavator parts.
  • Chassis-side injector faults. The branch that carries injector signals out toward the Caterpillar engine parts is part of this assembly, so a damaged run there is repaired with the same part instead of a separate order.
229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C
229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C

Installation & Commissioning

  1. Park the machine on level ground, shut it down and disconnect the batteries before you touch any part of the loom.
  2. Photograph the original wiring assembly along its full run — clips, grommets, tie points and the angle each connector enters — so the new one can go back the same way.
  3. Lay the new assembly beside the old one on the bench first. If anything does not line up, stop and call us rather than making it fit.
  4. Feed the wiring loom along the original path, working from the end with the least room — usually the cab entry — out toward the chassis.
  5. Seat every connector until its latch clicks, then look along each housing to confirm no pin has been pushed back out.
  6. Clip the loom into its original mounts and reinstate every grommet where it passes through a panel. A loom rubbing on bare metal will fail again.
  7. Reconnect the batteries, start the machine and test one function at a time: switches, monitor, levers, lighting, and the injector circuits running back toward the Caterpillar excavator engine.
  8. If a function is still dead, recheck the earth points and the connectors you disturbed before assuming the new wiring assembly is at fault.
229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C

Packaging & Delivery

DetailSpecification
Selling unitSingle item
Package size50 × 50 × 23 cm
Gross weight3.5 kg
PackingSealed export carton
Inner protectionStrapping secured inside the carton so connectors and sleeving are not crushed
Carton markingPart reference and order details shown on the outer label
Freight optionsAir, sea or courier, selected with your sales contact
ConsolidationCan be combined with other parts from our range when requested
Export destinationsAsia, Europe, Africa, the Americas and Oceania
Dispatch documentsAgreed with your sales contact before shipment

Ordering & Shipping Notes

  1. Read the part number off the wiring loom you are replacing — it is usually on a tag or moulded into a connector body — and send it with your enquiry.
  2. Add the machine model, the serial number where you have one, and clear photographs of the connector faces with the old wiring loom laid out flat.
  3. Tell us the quantity you need, whether that is a single unit for a repair or a stocking quantity, and mention any other CAT engine parts or electrical items you want quoted on the same order.
  4. Confirm price basis, freight and payment terms with your sales contact. These depend on destination and order size, so they are quoted per order rather than set out as fixed figures.
  5. Ask for the current lead time before you book the machine into the workshop, and say so if the job is urgent.
  6. Ask your sales contact for the machinery test report and any other product documentation you want to keep with the machine's service records.
  7. Confirm which shipping documents you need for import, and check the carton for damage before you sign for it.
229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C
229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C

Technical Support & Model Matching

Choosing the right reference is where most orders succeed or fail, so our team works with you before you commit: send the equipment details and the numbers you already have, and we will cross-check them against the options our supplier network holds, confirm the details that decide fitment, and suggest an alternative when a number has been replaced. After delivery we stay reachable by email, phone and video for installation questions and fault-finding. Founded in 2008 and based in Guangzhou, we export to Asia, Europe, Africa, the Americas and Oceania.

229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C

FAQ

Q1. Which excavators can use this wiring cable?

It is built for CAT 312C, 320C and 330C excavators. Those three models were produced in several configurations, so the machine is matched by loom reference rather than by model name: check the number on your original loom, the connector layout and the branch arrangement. Send us photographs and the details you have, and we will confirm the right excavator parts reference for your build.

Q2. Which part numbers are associated with this product?

229-6850, 271-3511 and 186-4605. They are not three names for the same loom — each one corresponds to a particular configuration, so the number on the component you are removing is the one to match. If the tag is missing or unreadable, the connector layout and the positions of the branches will identify it.

Q3. What type of excavator wiring assembly is this?

It is a cabin main chassis wiring assembly: the main electrical run between the operator cab and the machine side of the chassis. It carries the cab control circuits plus the related sensor, relay and injector circuits that leave the cab toward the CAT excavator engine, which is why it is also an engine injector wiring assembly.

Q4. What symptoms can indicate a damaged wiring assembly?

Intermittent electrical faults are the classic sign — a function that works when the machine is cold and drops out once it is warm, or one that cuts in and out on rough ground. Look also for damaged or corroded connectors, broken wires at a branch, warning signals with no obvious cause, short circuits, and components that behave erratically instead of failing outright. Worn insulation where the loom passes a panel edge or a hot component is worth checking on any machine with high hours.

Q5. What other CAT excavator electrical parts do you supply?

Cabin wiring assemblies, chassis wiring assemblies, engine wiring assemblies, injector wiring assemblies and hydraulic pump wiring assemblies, along with computer boards, monitors, ECUs, sensors, switches and relays. If you are already ordering this wiring assembly, list everything else you need on the same enquiry and we will quote it together.

Q6. Can I repair just the damaged section instead of fitting the whole wiring assembly?

You can, and some workshops do it as a temporary repair to get a machine back on site. The catch is that a splice adds a joint inside a loom that already lives with vibration, heat and moisture, so the fault tends to return — often at the next weak point rather than at the repair. Fitting the assembly replaces every conductor in the run in one go, which is why we supply it as a complete part.

Q7. Does this wiring assembly cover the injector circuits as well as the cab circuits?

Yes. The injector-related wiring runs inside this assembly alongside the cab circuits, so a fault on that branch is repaired with this wiring assembly rather than with a separate set of CAT engine parts. When you test after fitting, work through the injector circuits as carefully as you work through the cab functions.

229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C 320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C
  • 229-6850 271-3511 186-4605 Cabin Main Chassis Wiring Harness Engine Injector Excavator Wire Harness for CAT 312C  320C 330C

Download

Message Us