• 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU

4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU

No.1601025559461
The engine control unit (ECU) is designed to provide precise engine management and stable electronic control for diesel engines. It is an ideal replacement for excavator engine repair, diagnostics, and maintenance.
Model Number:
8982277920
Compatible Brand:
Isuzu
$699.00
Description

Product Overview

Among the diesel engine components, the engine control unit is the module that runs the fuel side of an Isuzu diesel engine. It reads crank and cam position, rail pressure, coolant temperature and throttle demand, works out how much fuel each injector should receive and when, and keeps that information flowing to the machine's controller and monitor panel. When the original unit fails, the engine will not start, drops into a derate, or runs unevenly no matter how many injectors and sensors are changed.

This unit is built as a replacement for the original module on 4HK1, 4JJ1, 6HK1 and 4JG1 applications. The board carries premium electronic components and is tested before dispatch, and the housing and connector layout follow the original so the module sits where the old one came out. It suits excavators and other diesel-powered construction equipment where the wiring, sensors and injectors have already been checked and only the control side needs restoring.

Like most electronic parts for Isuzu engines, the unit is normally replaced rather than repaired once the board fails. Workshops, machinery dealers, fleet maintenance teams and owner-operators use it to get a machine back to work without waiting on an OEM-branded module, and to keep a spare on the shelf for the machines they run hardest.

4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU

Engine Model Coverage

  • 4HK1: the four-cylinder engine used across mid-size excavators and industrial equipment. Read the plate on the block as well as the machine badge, because the two do not always agree once an engine has been rebuilt.
  • 4JJ1: a smaller four-cylinder unit fitted to compact excavators and industrial applications, where the engine bay is tight and access to the module is limited.
  • Isuzu 6HK1: the six-cylinder member of the family, common in larger excavators and in machines that work continuously under load.
  • 4JG1: a four-cylinder engine used in smaller excavators and stationary equipment, where the control version can differ between build years and emissions packages.
  • How to confirm: send the engine model stamped on the block, the machine model and serial, and the number from the old module. That is what we check against, not the badge, because an excavator engine can be re-powered or rebuilt with different control hardware over its working life.
  • Do not assume a swap: these are four separate control families, and a module that runs a 4HK1 properly will not necessarily run a 6HK1 to the same standard.

Part Number Cross-Reference

This module is built to replace four Isuzu references: 8981530572, 8982103620, 8982224512 and 8982277920. Treat them as the set of numbers the same replacement unit is validated against rather than as four interchangeable labels. The number printed on the unit you are taking off is what decides the match.

On an Isuzu 6HK1 or any other engine in this family, the reference usually sits on a label fixed to the control unit housing, and on some builds it is repeated on the connector shroud or etched into the casing. Photograph the label and the connector face before removal. Machine model and serial on their own are not always enough, because two machines built to the same model number can carry different control versions depending on year and emissions package.

If the number on your unit is not one of the four, do not order on the assumption that it will work. Send us the number and the photo and we will check what the correct reference is. We work through these enquiries daily as a diesel engine components supplier, and five minutes of checking is cheaper than fitting the wrong module twice.

4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU
4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU

Specifications

SpecificationDetail
Product nameExcavator Engine ECU Monitor
Part nameEngine control unit (ECU)
ConditionNew
Brand Namelanxin
Place of OriginChina
Warranty6 months
Video outgoing-inspectionProvided
Machinery Test ReportProvided
Marketing TypeOrdinary Product
ApplicationExcavator engine management
Engine models4HK1, 4JJ1, 6HK1, 4JG1
Applicable IndustriesBuilding Material Shops, Machinery Repair Shops, Manufacturing Plant, Retail, Construction works , Energy & Mining, Other
4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU

Fault Symptoms and Pre-Replacement Checks

  • Crank but no start: the engine turns over normally and there is fuel at the rail, but the injectors never receive a pulse.
  • Sudden derate: power falls to a fixed low limit, throttle response flattens and the machine will not pull under load.
  • Unstable running: a hunting idle, a miss that moves between cylinders, or smoke that no injector change fixes.
  • Communication faults: a blank or erratic monitor panel, a controller that cannot see the engine, or codes that return as soon as they are cleared.
  • Check the connector first: water ingress, green corrosion or a backed-out pin at the plug causes more failures on these diesel engine components than the board itself does. Dry it, clean it and re-seat it before going further.
  • Check supply and ground: battery voltage under load, and the ground points serving the control unit. A lifted ground or a low-voltage circuit imitates a dead module at no cost.
  • Check the wiring and sensors: a chafed wire, a shorted sensor or a damaged injector coil can pull the control signal down. These are the cheapest excavator engine parts to rule out and the most common reason a replacement fails a second time.
  • Swap on evidence: we would rather you replaced the module because the diagnosis pointed at it than because it was the next item on the list. That habit saves more Isuzu engine parts than any single test.

Fitting and First Start

  1. Record everything before you touch a fastener: photograph the label, the connector face and the wiring routing, and write down the number from the old unit.
  2. Disconnect the battery negative and let the system discharge before unplugging the control unit. A live connector is the quickest way to damage the replacement.
  3. Release the connector locks by hand. Do not lever against the pins and do not pull on the loom to separate a stiff plug.
  4. As with any excavator engine parts swap, compare the new module with the old one on the bench: connector keyways, pin count, mounting lugs and housing height all have to line up before you go any further.
  5. Mount with the original fasteners and tighten the housing evenly. It is not a load-bearing component, so it does not need force.
  6. Reconnect, then check supply voltage and ground at the plug before the first crank. On an Isuzu 6HK1 that one step prevents most repeat no-start comebacks.
  7. Start the engine and watch idle quality, throttle response, the monitor panel and stored codes through a diagnostic tool. A short loaded run tells you more than ten minutes at idle.
  8. Confirm whether your machine needs the module adapted or injector codes written in. We do not present this unit as arriving pre-programmed for a specific machine, so plan that step with a dealer-level tool or your Isuzu service contact.
4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU
4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU

Inspection, Packing and Dispatch

Every module goes through a quality inspection and a functional test before it is packed. We check the housing, the connector pins and the board, then power the unit up on the bench. As a diesel engine parts supplier we would rather hold an order a day than ship a module we have not switched on.

An Isuzu diesel engine control unit travels as a single item, wrapped for protection inside a carton measuring 25 x 18 x 10 cm with a gross weight of 15 kg. The carton is closed for export and handled as electronic equipment rather than as a casting: no dropping, no stacking under heavy parts, and no opening in transit.

The outgoing inspection video, the machinery test report and the catalogue can be supplied with your order if your workshop or your own customer needs the paperwork. If your packing specification or your forwarder wants something different, tell us when you order; we follow customer packing instructions where we can, and we handle an Isuzu engine parts shipment the same way.

Ordering, Payment and After-Sales

  1. Send the engine model, the machine model and serial, and the number printed on the module you are taking off. Isuzu engines of the same code can carry different control versions by build year, so the number on the old unit counts as much as the engine code.
  2. We confirm the reference and quote. Tell us the quantity and the deadline you are working to, so stock and the delivery schedule can be checked against it.
  3. Payment is agreed at quotation. As a rule we work on a deposit with the balance against the bill of lading, by T/T, and L/C is also acceptable; FOB, CIF and CNF are quoted to suit your forwarder.
  4. Lead time is confirmed with the quotation, because it depends on the item and the quantity rather than on a fixed calendar.
  5. We export to Asia, Europe, Africa, the Americas and Oceania. Urgent machine-down orders normally travel by air; stock orders go by sea.
  6. The warranty runs for 6 months. If a unit gives trouble, send the machine details, the fault symptoms and a short video, and we will work through the diagnosis with you.
  7. We also supply engine wiring harnesses, sensors, monitors, controllers, complete diesel engine assemblies, fuel injectors and hydraulic pumps, along with the wider range of excavator engine parts our customers ask for. If you cannot find a number, ask; the catalogue is much larger than what we show on our website.
4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU
4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU

Technical Support & Model Matching

Choosing the right reference is where most orders succeed or fail, so our team works with you before you commit: send the equipment details and the numbers you already have, and we will cross-check them against the options our supplier network holds, confirm the details that decide fitment, and suggest an alternative when a number has been replaced. After delivery we stay reachable by email, phone and video for installation questions and fault-finding. Founded in 2008 and based in Guangzhou, we export to Asia, Europe, Africa, the Americas and Oceania.

4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU

FAQ

Q1. Which engine models does this unit cover?

It is built for 4HK1, 4JJ1, 6HK1 and 4JG1 applications. Those four families cover a large share of the Isuzu engines working in excavators and construction equipment, but the engine code on its own is not a fitment decision. The number on the old module has to match as well.

Q2. Which part numbers does this ECU replace?

It replaces 8981530572, 8982103620, 8982224512 and 8982277920. Compare the label on the module you are removing against that list before ordering. If yours carries a different number, send us a photo of the label and we will identify the correct reference.

Q3. Is every unit tested before it ships?

Yes. Each module is inspected and put through a functional test on the bench before packing, and the outgoing inspection video and machinery test report can travel with the order. Ask for them when you place it if your workshop or your own customer needs the paperwork.

Q4. Does the replacement need programming after fitting?

We do not present this unit as plug-and-play on every machine. Some applications run it once the adaptation steps are completed with a dealer-level diagnostic tool, and some need injector codes written in. Tell us the machine model and serial before you order and we will confirm what your application requires.

Q5. Is this an original Isuzu part or an aftermarket replacement?

It is an aftermarket replacement supplied under the lanxin brand and matched to the original reference numbers, not an Isuzu-branded part. That is what makes the cost workable for workshops and fleets, and it is why we ask you to confirm the number before ordering rather than after. As a diesel engine parts supplier, we would rather lose a sale than send a module that does not match.

4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620 8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU
  • 4HK1 4JJ1 6HK1 4JG1 ECU Engine Control Unit 8981530572 8982103620  8982224512 8982277920 Excavator Engine ECU for ISUZU

Download

Message Us