

|
item
|
value
|
|
Condition
|
New
|
|
Applicable Industries
|
Building Material Shops, Machinery Repair Shops, Manufacturing Plant, Retail, Construction works , Energy & Mining, Other
|
|
Showroom Location
|
None
|
|
Video outgoing-inspection
|
Provided
|
|
Machinery Test Report
|
Provided
|
|
Marketing Type
|
Ordinary Product
|
|
Place of Origin
|
China
|
|
Guangdong
|
|
|
Brand Name
|
lanxin
|
|
Warranty
|
1 Year
|
|
Product name
|
Excavator spare parts E320V2 E312 E312V2/E311 dual wire stepper motor E320 throttle motor 7Y-3913 4I-5466
|











This dual-wire stepper motor is the electronic throttle actuator fitted to Caterpillar's E320V2 and E312 excavator family. It takes the command signal from the machine controller and moves the engine throttle, so the engine picks up and drops revs cleanly instead of hunting, surging or sitting at idle. Supplied new as a complete motor assembly, it replaces the original unit directly and saves a rebuild of the throttle control. Workshops, fleet maintenance teams and parts counters buy it as a straightforward answer to a failed throttle motor, and as a match to the engine work they already carry out on these machines. As an excavator parts supplier we hold this motor with the sensors and linkages that are usually checked at the same time.
| Motor type | Dual-wire stepper motor (electronic throttle actuator) |
| Part numbers | 7Y-3913, 4I-5466 |
| Compatible machine models | Caterpillar E320V2, E312, E312V2, E311 |
| Mounting | Original position and fixing points |
| Electrical connection | Two-wire plug |
| Application | Excavator engine throttle control |
| Brand | Lanxin |
| Place of origin | Guangdong, China |
| Warranty | 6 months |
| Selling unit | Single item |
| Package size | 21 × 3 × 4 cm |
Order by the number on the old motor rather than by machine model alone. Read it from the motor housing or the plug, photograph it, and send it with your machine model and serial number. If the printing has worn away, clear photos of the motor, the linkage and the connector are usually enough for us to identify it. Let us know the wire count and colours on the plug you are replacing so the connection can be checked at the same time. As an engine parts supplier we confirm every match before dispatch, and if a number does not line up with the machine you have given us, we will flag it rather than send a part that will not fit.
Our technical team supports buyers before and after the order. Send us your OEM part number or machine and engine details and we will confirm the correct match for your repair, overhaul or replacement job. If you are unsure what has failed, share the symptoms and our specialists will help with troubleshooting and narrow down the right assembly. We also provide installation and commissioning guidance, and share product documentation on request. With coverage across Komatsu, Caterpillar, Cummins, Isuzu, Hitachi, Sany, Doosan and Kubota machinery, we can help consolidate your parts requirements into one order.
This is a new unit, not a rebuilt or reconditioned one, and it arrives as a complete motor assembly ready to mount. As an engine parts supplier working with Cat machines every day, we check each unit against your part number and pack it for transport before it leaves.
You receive the motor assembly shown here. If the job also needs caterpillar spare parts such as sensors, relays or a new plug, tell us when you order and we will put them in the same shipment. If you also need a linkage pin or bracket, send a photo of the old setup and we will confirm what we can supply.
Yes. Every unit goes through outgoing inspection, that inspection is recorded on video, and a machinery test report is issued with the motor. When it arrives, check the plug pins and the connector orientation before you mount it, and keep the packing until the machine is running again.
Keep it in its original carton, in a dry, covered store away from damp floors and direct sunlight. Long storage in a humid workshop is what damages the plug pins and the internal drive, so before fitting a motor that has sat on the shelf for months, inspect the connector and the mounting face, and check that the linkage moves freely.
Yes. As an excavator parts supplier we cover the electrical side of these machines as well as the mechanical side, including the items that work with the throttle circuit. Send a list with your machine model and we will confirm availability and add it to the same order.
Send photos of the motor from both sides, the connector and the linkage it drives, plus your machine model and serial number. Numbers are often worn or painted over, and the mounting pattern and plug shape are usually enough to identify the correct replacement. We will confirm the match before you order.